TM 9-2320-26920-1
RELAY QUICK - RELEASE VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Before replacing plugs and fittings, wipe mounting threads clean, and wrap with Teflon tape (page 2-142).
Check fitting markings, and replace in original position to insure proper hookup of lines.
12. Valve (1)
Plug (2)
Screw in, and tighten using 3/8inch key.
13.
Plug (3)
Screw in, and tighten using 9/16-inch
wrench.
14.
Coupling (4)
Screw in, and tighten using 7/8-inch
wrench.
15.
Fitting (5)
Screw in, and tighten using 1 1/16-inch
wrench.
16.
Elbow (6)
Screw in, and tighten using 3/4-inch
wrench.
NOTE
Check tags on lines from removal to insure proper hookup.
17. Frame (7)
Valve (1)
Place in position.
18. Line (8)
Elbow (9)
Put in position.
19. Valve (1) to
Two screws (10)
Screw In, and tighten using 1/2-inch
frame (7)
and nuts (11)
socket, handle, and 112-inch wrench.
2-542
Previous Page
