TM 9-232069-20-1
INVERSION VALVE - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Close reservoir draincocks (page 2-106).
2. Check for leakage and proper operation of valve (page 2-122).
TASK ENDS HERE
RELAY QUICK - RELEASE VALVE
This task covers:
a. Removal (page 2-540)
b. Installation (page 2-542)
INITIAL SETUP
Tools
Materials/Parts
Handle, ratchet, 318-Inch drive
Chalk, carpenter's (item 7, appendix C)
Key, screw, socket-head, 3/18inch
Rags, wiping (item 24, appendix C)
Pliers, diagonal cutting
Tags, marking (item 29, appendix C)
Socket, 3/8-inch drive, 1/2-inch
Tape, Teflon (item 32, appendix C)
Wrench, open-end, 1/2-inch
Ties, cable (two required)
Wrench, open-end, 9/16-inch
Wrench, open-end, 3/14-inch
Personnel Required
Wrench, open-end, 13/16-inch
Wrench, open-end, 7/8-inch
One
Wrench, open-end, 1 1/16-inch
Equipment Condition
Inversion valve air lines removed
2-539
Previous Page
