TM 9-2320-269-20-1
RELAY VALVES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If valve was removed for access to other components, go to step 23.
Before installing plugs and fittings, wipe mounting threads clean, and wrap with Teflon tape (page 2-142).
Check fitting markings, and install in original position to insure proper hookup of lines.
17. Valve (6)
Plug (10)
Screw In, and tighten using 3/8-inch
socket-head screw key.
18.
Two elbows (7)
Screw in, and tighten using 13/16-inch
open-end wrench.
19.
Coupling (9)
Screw in, and tighten using 7/8-inch
open-end wrench.
20.
Elbow (8)
Screw in, and tighten using 11/16-inch
open-end wrench.
NOTE
Check tags on lines from removal to insure proper hookup.
TA228922
2-551
Previous Page
