TM 9-2320-269-20-1
REAR MODULATOR VALVES - CONTINUED
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Wrench, open-end, 7116-inch
Chalk, carpenter's (item 7, appendix C)
Wrench, open-end, 112-inch
Wrench, open-end, 5/8-inch
Tags, marking (item 29, appendix C)
Wrench, open-end, 11/16-inch
Tape, Teflon (item 32, appendix C)
Wrench, open-end, 13/16-inch
Wrench, open-end, 7/8-inch
Personnel Required
One
Equipment Condition
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Drain air from system before removing lines or fittings to avoid personnel injury from compressed air.
Be careful when working in tight places to avoid personnel injury.
NOTE
This procedure is for one rear modulator valve. The removal for the other modulator valve is the same.
Tag all wires and lines on removal to aid in installation (page 2-142).
2-554