TM 9-2320-269-20-1
REAR MODULATOR VALVES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
Mark location of fittings before removal to aid in installation (page 2-142).
7. Valve (1)
Elbow (2)
Using 7/8-inch wrench, unscrew
and take off.
8.
Fitting (3)
Using 7/8-inch wrench, unscrew and
take off.
9.
Plug (4)
Using 7/16-inch wrench, unscrew
and take off.
INSTALLATION
NOTE
Clean threads on plugs and fittings, and wrap with Teflon tape (page 2-142).
Check fitting markings, and replace in original position to insure proper hookup.
10. Valve (1)
Plug (4)
Screw in, and tighten using 7/16-inch
wrench.
11.
Fitting (3)
Screw in, and tighten using 7/8-inch
wrench.
12.
Elbow (2)
Screw in, and tighten using 7/8-inch
wrench.
13.
Bracket (5)
Valve (1)
Put in position.
14. Valve (1)
Four new lockwashers
Screw in, and tighten using 1/2-inch
(6) and nuts (7)
wrench.
NOTE
Check line markings from removal to insure proper hookup.
2-556
Previous Page
