TM 9-2320-269-20-1
FRONT MODULATOR VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
Mark location of fittings before removal to aid in installation (page 2-142).
7.
Fitting (1)
Hose (2)
Using 1-inch wrench, unscrew and
take off.
8.
Valve (3)
Fitting (1)
Using 7/8-inch wrench, unscrew and
take off.
9. Elbow (4)
Using -inch wrench, unscrew and
take off.
10. Plug (5)
Using 7116-inch wrench, unscrew and
take off.
INSTALLATION
NOTE
Check fitting markings, and replace in original positions to insure proper hookup.
Wrap clean threads with Teflon tape (page 2-142).
11. Valve (3)
Plug (5)
Screw in, and tighten using 7/16-inch
wrench.
12.
Elbow (4)
Screw in, and tighten using 3/4-inch
wrench.
13.
Fitting (1)
Screw in, and tighten using 7/8-inch
wrench.
14.
Hose (2)
Screw on, and tighten using 1-inch wrench.
14. Hose (2)
Screw on, and tighten using 1-inch wrench.
2-560
Previous Page
