TM 92320-269-20-1
ALCOHOL EVAPORATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
2.
Alcohol evaporator
Three screws (3),
a. Using two 7/16-inch wrenches,
(1) and
lockwashers (4),
unscrew and take off.
bracket (2)
and nuts (5)
b Get rid of lockwashers (4).
3.
Bracket (2)
Alcohol
Take off.
evaporator (1)
INSTALLATION
4.
Bracket (2)
Alcohol
Put in position.
evaporator (1)
5. Bracket (2) and
Three screws (3),
Screw in, and tighten using two
alcohol
new lockwashers
7116-inch wrenches.
evaporator (1)
(4), and nuts (5)
NOTE
Check tags on lines to insure proper hookup.
6. Two couplings
Two lines (7)
Screw on, and tighten using -inch
and -inch wrenches.
NOTE
FOLLOW-ON MAINTENANCE
1. Refill alcohol evaporator to proper operating level with alcohol.
2. Close left engine hood panel (page 2-8).
TASK ENDS HERE
TA228931
2-564
Previous Page
