TM 9-2320-269-20-1
AIR LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
6.
Elbow (10)
Hose (7)
Screw in, and tighten using 1-inch and
13/16-inch wrenches.
Hold hose firmly when tightening
nut. Nut and hose will turn
together.
7.
Torque rod (5)
Two clamps (8),
a.
Slide clamps (8) into place over
screws (6), hoses
torque rod (5).
with clamps (9),
b.
Screw in, and tighten using 7/16-
and hose (7)
inch wrench.
8.
Hose (2) and
New cable tie (4)
Wrap around, and pull tight.
support bar (3)
9.
Coupling (1)
Hose (2)
Screw in, and tighten using 7/8-inch and
1-inch wrenches.
TA228934
2-569
Previous Page
