TM 9-2320-269-20-1
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
21. Two elbows (1)
Two hoses (2)
Screw on, and tighten using 13/16-inch
and 1-inch open-end wrenches.
22. Axle (3)
Valve (4) and
Pull over.
two hoses (2)
23. Bracket (5)
Valve (4)
Put in place.
24. Valve (4) to
Two screws (6) and
Screw in, and tighten using 1/2-inch open-
bracket (5)
nuts (7)
end wrench and 112-inch box-end wrench.
25. Fitting (8)
Line (9)
Screw in, and tighten using 5/8-inch
and 13/16-inch open-end wrenches.
26. Coupling (10)
Line (11)
Screw on, and tighten using 71/8-inch
and 15/16-inch open-end wrenches.
Three hoses (15),
a. Put hoses (15), (16), and (17) over
(16), and (17) and
six clamps (18)
b. Slide clamps (18) into place.
29. Six clamps (18)
Two screws (19)
Screw in, and tighten using 7/16-inch
open-end wrench.
TA228923
2-552