TM 9-2320-269-20-1
STOPLIGHT SWITCH
This task covers:
a. Removal (page 2-515)
b. Installation (page 2-517)
INITIAL SETUP:
Tools
Personnel Required
Wrench, open-end, 38-inch
Two
Wrench, open-end, 1/2-inch
Wrench, open-end, 518-inch
Equipment Condition
Wrench, open-end, 11/16-inch
Wrench, open-end, 3/4-inch
Battery ground cable disconnected
(two required)
Wrench, open-end, 1-inch
Air reservoirs drained (page 2-106).
Wrench, pipe, 14-inch
Materials/Parts
Chalk, carpenter's (item 7, appendix C)
Lockwashers, rail studs
(four required)
Tags, marking (item 29, appendix C)
Tape, teflon (item 32, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Seat must be pushed all the way forward.
Tag wires on removal to aid in installation (page 2-142).
2-515
Previous Page
