TM 9-2320-269-20-1
STOPLIGHT SWITCH - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Close reservoir draincock (page 2-106).
2. Connect battery ground cable (page 2-414).
3. Check operation of switch (TM 9-2320-269-10).
TASK ENDS HERE
ONE-WAY CHECK VALVES
This task covers:
a. Removal (page 2-520)
b. Installation (page 2-520)
INITIAL SETUP:
Tools
Personnel Required
Wrench, open-end, 1-inch
One
Wrench, open-end, 1/14-inch
Wrench, open-end, 1 38-inch
Equipment Condition
Materials/Parts
Secondary/supply air reservoir removed
Tape, teflon (item 32, appendix C)
TA228902
2-519
Previous Page
