TM 9-2320-269-20-1
AIR PRESSURE INDICATOR SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
3 Fitting (1)
Switch (2)
a. Wrap clean threads on switch (2) and
fitting (1) with two turns of teflon
tape (page 2-142).
b. Screw in, and tighten with 314-inch
wrench.
4 Switch
Screw (4)
Screw in, and tighten using flat-tip
tab (3)
and lead wire (5)
screwdriver.
NOTE
FOLLOW-ON MAINTENANCE:
1. Close reservoir draincocks (page 2-106).
2. Connect battery ground cable (page 2-414).
3. Start engine, and check for leaks and proper operation of switch (TM 9-2320-269-10).
TA228900
TASK ENDS HERE
2-514
Previous Page
