TM 9-2320-269-20-1
STOPLIGHT SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
NOTE
Use line markings to insure proper hookup.
12. Elbow (1)
Line (2)
Screw on, and tighten using two 3/4-inch
wrenches.
13. Elbow (3)
Line (4)
Screw on, and tighten using 5/8-inch
and 111/16-inch wrenches.
NOTE
Check wire markings from removal to insure proper hookup.
14. Two terminals (5)
Two wires (6),
Screw in, and tighten using 3/8-inch
lockwashers (7),
wrench.
and nuts (8)
NOTE
Before replacing seat, be sure adjustable rails are alined evenly to aid mounting.
15. Four studs (9)
Seat (11)
With help from assistant, put in
and two rails (10)
position.
16. Four studs (9)
Four new lockwashers
Screw in, and tighten using 112-inch
(12) and nuts (13)
wrench.
2-518
Previous Page
