TM 9-2320-269-20-1
SLIP YOKE AND OIL SEAL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
6.
Cork oil seal
a. Place old ring (1) on 1/4-inch
ring (1)
thick piece of cork gasket material,
and cut new ring (1) to match.
b. Slip new ring (1) onto shaft (2)
against steel ring (3) and into
cap (4).
7.
Slip yoke (5)
Seal cap (4)
Slide cap (4) against yoke (5), and
tighten using a pipe wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install propeller shaft yoke to mating shaft yoke (page 2-457).
2.
Lubricate slip yoke (LO 9-2320-269-12).
TASK ENDS HERE
TA228864
2-464
Previous Page
