SLIP YOKE AND OIL SEAL - CONTINUED - TM-9-2320-269-20-10512

TM 9-2320-269-20-1

SLIP YOKE AND OIL SEAL - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

Cork oil seal

Separate and peel cork ring (4) from

shaft (1)

ring (4) and

propeller shaft (1).

steel ring (5)

NOTE

If only oil seal is being removed, go to INSTALLATION.

Slip yoke (2)

Slide off end of shaft (1), and clean yoke

and shaft splines (6) of any dirt or old

grease using clean rags.

INSTALLATION

NOTE

If only oil seal is being installed, go to step 6.

Before replacing slip yoke, check markings from removal to insure proper alignment.

Slip yoke (2)

a. Coat yoke and shaft splines (6) with

shaft (1)

grease.

b. Position yoke (2) on shaft (1), and

slide in position.

TA228863

2-463

Index