TM 9-2320-269-20-2
PUMP - TO - RIGHT SIDE OUTRIGGER CONTROL VALVE HOSE ASSEMBLY
This task covers:
a.
Removal (page 2-1164)
c.
Inspection/Replacement (page 2-1166)
b.
Cleaning (page 2-1164)
d.
Installation (page 2-1166)
INITIAL SETUP
Tools
Materials/Parts
Fish tape, 50-ft reel
Detergent, non-sudsing (item 12, appendix C)
Pail, utility, 3-qt
Rags, wiping (item 24, appendix C)
Wrench, open-end, 7/8-inch
Solvent, drycleaning (item 28, appendix C)
Wrench, open-end, 1 1/16-inch
Tape, telfon (item 32, appendix C)
Wrench, open-end, 1 1/16-inch,
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
1.
Hydraulic tank (1)
Shutoff valve (2)
Using 1 1/16-inch wrench, turn off.
2.
Swivel adapter (3)
Pump-to-outrigger
a. Position pail to catch hydraulic fluid.
control valve hose
b. Using 7/8-inch and 1-inch wrenches,
assembly (4)
unscrew and take off.
c. Dispose of drained fluid.
3.
90% swivel
Pump-to-outrigger
a. Using 7/8-inch and 1-inch wrenches,
adapter (5)
control valve hose
unscrew and take off.
assembly (2)
b. Pull out of truck.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
2-1164
Previous Page
