TM 9-2320-269-20-2
PUMP - TO - RIGHT SIDE OUTRIGGER CONTROL VALVE HOSE ASSEMBLY - CONTINUED
CLEANING - CONTINUED
4.
All metal parts
a.
Clean in drycleaning solvent.
b.
Wipe dry with clean, dry rags.
5.
Hose assembly (1)
a.
Clean in clean, soapy water.
b.
Rinse in clean water.
c.
Wipe connectors clean with clean rags
dampened with drycleaning solvent.
d. Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-142).
Replace damaged or defective parts as necessary.
6.
Hose assembly (1)
a. Look for cracks, breaks, tears,
b. Look for loose connectors.
c. Look for damaged threads.
7.
All threaded parts
Look for stripped or gouged threads.
INSTALLATION
NOTE
Before installing hose assemblies, wrap all clean, external threads with two turns of teflon tape (page 2-
142).
8.
90% swivel
Pump-to-outrigger
Screw on, and tighten using 7/8-inch
adapter (2)
control valve hose
and 1-inch wrenches.
assembly (1)
9.
Swivel adapter (3)
Pump-to-outrigger
a. Put in position.
control valve hose
b. Screw on, and tighten using 7/8-inch
assembly (1)
and 1-inch wrenches.
2-1166