TM 9-2320-269-20-2
PUMP FLOW CONTROL VALVE - TO - RETURN LINE HOSE ASSEMBLY
This task covers:
a.
c.
b.
d.
INITIAL SETUP
Tools
Materials/Parts
Pail, utility, 3-qt
Detergent, non-sudsing (item 12,
Wrench, open-end, 7/8-inch
appendix C)
Wrench, open-end, 1-inch
Rags, wiping (item 24, appendix C)
Wrench, open-end, 11/16-inch
Solvent, drycleaning (item 28, appendix C)
Tape, teflon (item 32, Appendix C)
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
1.
Tank (1)
Shut-off valve (2)
Using 1 1/16-inch wrench, turn off.
2.
Straight swivel
Pump flow control
a. Position pail to catch hydraulic fluid.
adapter (3), and
valve-to-return line
b. Using 7/8-inch and 1-inch wrenches,
45% swivel
hose assembly (5)
unscrew and take off.
adapter (4)
c. Take out of truck.
d. Dispose of drained fluid.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
2-1168