FRONT WINCH CM2 VALVE - TO - RETURN LINE FILTER HOSE

TM 9-2320-269-20-2

FRONT WINCH CM2 VALVE - TO - RETURN LINE FILTER HOSE

This task covers:

a. Removal(page 2-1136)

c.

Inspection/Replacement(page 2-1138)

b. Cleaning(page2-1137)

d.

Installation(page 2-1138)

INITIAL SETUP:

Tools

Materials/Parts

Handle, ratchet, 1/2-inch drive

Detergent, non-sudsing (item 12, appendix C)

Pail, utility, 3-qt

Rags, wiping (item 24, appendix C)

Screwdriver, flat-tip, 3/8-inch

Solvent, drycleaning (item 28, appendix C)

Socket, 1/2-inch drive, 11116-inch

Personnel Required

One

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause

irritation.

1.

CM2 valve-to-return

Clamp (2), two

Using 11116-inch socket and handle un-

line filter hose (1)

screws (3), and two

screw and take off.

nuts (4)

2.

Dixon insert (5)

Hose (1)

Using flat-tip screwdriver, loosen and

pull off.

3.

CM2 valve-to-return

Clamp (6), two

a. Position pail to catch hydraulic fluid.

line filter hose (1)

screws (7), and two

b. Using 11116-inch socket and handle

nuts (8)

unscrew and take off.

4.

Dixon insert (9)

CM2 valve-to-return

a. Using flat-tip screwdriver, pry loose.

line filter hose (1)

b. Twist, and pull off.

2-1136