CONSOLE CM2 VALVE - TO - RETURN LINE FILTER HOSE

TM 9-2320-269-20-2

CONSOLE CM2 VALVE - TO - RETURN LINE FILTER HOSE

This task covers:

a.

Removal (page 2-1112)

c. Inspection/Replacement (page 2-1115)

b.

Cleaning (page 2-1114)

d. Installation (page 2-1116)

INITIAL SETUP

Tools

Materials/Parts - Continued

Fish tape, 50-ft reel

Rags, wiping (item 24, appendix C)

Handle, ratchet, 3/8-inch drive

Solvent, drycleaning (item 28, appendix C)

Pail, utility, 3-qt

Screwdriver, 3/8-inch, flat-tip,

Personnel Required

8-inch

Socket, 3/8-inch drive,

One

9/16-inch

Wrench, open-end, 9/16-inch

Equipment Condition

Wrench, open-end, 1 7/8-inch

Console cover removed (page 2-1092).

Materials/Parts

Detergent, non-sudsing (item 12,

appendix C)

Packing, preformed

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can

cause irritation.

1.

Hose (1)

Clamp (2), two

a. Position pail to catch hydraulic

screws (3), and

fluid.

nuts (4)

b. Using 9/16-inch wrench, 9/16-inch

socket, and handle, unscrew and take

off.

c. Dispose of drained fluid.

2-1112