TM 9-2320-269-20-2
POLE GUIDE ELEVATION HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-1035)
c. Inspection/Replacement (page 2-1041)
b. Cleaning (page 2-1041)
d. Installation (page 2-1042)
INITIAL SETUP
Tools
Materials/Parts - Continued
Fish tape, 50-ft reel
Rags, wiping (item 24, appendix C)
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28,
Pail, utility, 3-qt
appendix C)
Socket, 3/8-inch drive, 7/16-inch
Tags, marking (item 29, appendix C)
Socket, 3/8-inch drive, 9/16-inch
Tape, teflon (item 32, appendix C)
Wrench, open-end, -inch
Wrench, open-end, 9/16-inch
Personnel Required
Wrench, open-end, 5/8-inch
Wrench, open-end, 11/16-inch
Two
Materials/Parts
Equipment Condition
Detergent, non-sudsing (item 12,
Console cover removed (page 2-1092).
Appendix C)
Telescopic tubes removed (page 2-1094).
Lockwashers, housing cover
(12 required)
Nuts, elastic stop, hose bracket
(two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
2-1035
Previous Page
