TM 9-2320-269-20-2
POLE GUIDE ARMS HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Before installing hose assemblies, wrap all clean external threads with two turns of teflon
tape (page 2-142).
25.
Pole guide
Molded hose
a. Check tags for proper locations.
assembly (1)
assembly (2)
b. Put in position.
26.
Swivel adapter (3)
Pole guide arms
a. Take off tag.
cylinder hose
b. Screw on, and tighten using 5/8-inch
assembly (4)
and 11/16-inch wrenches.
27.
Swivel adapter (5)
Pole guide arms
a. Take off tag.
cylinder hose
b. Screw on, and tighten using 5/8-inch
assembly (6)
and 11/16-inch wrenches.
28.
Swivel adapter (7)
Pole guide tilt
a. Take off tag.
cylinder hose
b. Screw on, and tighten using 5/8-inch
assembly (8)
and 11/16-inch wrenches.
29.
Swivel adapter (9)
Pole guide tilt
a. Take off tag.
TA229248
2-1030
Previous Page
