POLE GUIDE ARMS HYDRAULIC DRIVE LINES - CONTINUED
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
For more information on how to clean parts, go to General Maintenance Instructions
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
a. Clean in clean, soapy water.
b. Rinse in clean water.
c. Wipe connectors clean with clean
rags dampened in drycleaning solvent.
d. Wipe dry with clean, dry rags.
For more information on how to inspect parts, go to General Maintenance Instructions
Replace damaged or defective parts as necessary.
a. Look for cracks, breaks, tears,
b. Look for loose connectors.
c. Look for damaged threads.