TM 9-2320-269-20-2
POLE GUIDE ARMS HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
39.
Molded hose
Four swivel
Screw on, and tighten using 112-inch
assembly (1)
adapters (10) with
and 5/8-inch wrenches.
couplings (11)
40.
Operator's console
Two valve-to-molded
With help from assistant, and using
(12) and derrick
hoses and hose
fish tape, put in position.
mast (13)
assembly (14)
and (15)
41.
Four swivel
Four hose assem-
a. Check tags for correct locations,
adapters (16)
blies (14), (15),
and take off.
(17), and (18)
b. Screw on, and tighten using 9/16-inch
and 11116-inch wrenches.
42.
Four couplings (11)
Four swivel adapters
a. Check tags for correct locations,
with swivel
(16) with hose assem-
and take off.
adapters (10)
blies (14), (15),
b. Screw on, and tighten using 9/16-inch
(17), and (18)
and 11/16-inch wrenches.
2-1033
Previous Page
