TM 9-2320-269-20-2
POLE GUIDE ELEVATION HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Before installing hose assemblies, wrap all clean external threads with two turns of teflon tape (page 2-
142).
25.
Pole guide
Molded hose
a. Check tags for proper locations.
assembly (1)
assembly (2)
b. Put in position.
26.
Swivel adapter (3)
Pole guide arms
a. Take off tag.
cylinder hose
b. Screw on, and tighten using 11/16-inch
assembly (4)
and 5/8-inch wrenches.
27.
Swivel adapter (5)
Pole guide arms
a. Take off tag.
cylinder hose
b. Screw on, and tighten using 11/16-inch
assembly (6)
and 5/8-inch wrenches.
28.
Swivel adapter (7)
Pole guide tilt
a. Take off tag.
Cylinder hose
b. Screw on, and tighten using 11/16-inch
assembly (8)
and 518-inch wrenches.
29.
Swivel adapter (9)
Pole guide tilt
a. Take off tag.
cylinder hose
b. Screw on, and tighten using 11/16-inch
assembly (10)
and 5/8-inch wrenches.
TA229258
2-1042
Previous Page
