TM 9-2320-269-20-2
TURRET ROTATION HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-1047)
c. Inspection/Replacement (page 2-1053)
b. Cleaning (page 2-1052)
d. Installation (page 2-1053)
INITIAL SETUP
Tools
Materials/Parts - Continued
Fish tape, 50-ft reel
Solvent, drycleaning (item 28, appendix C)
Pail, utility, 3-qt
Tags, marking (item 29, appendix C)
Wrench, open-end, 9116-inch
Tape, teflon (item 32, appendix C)
Wrench, open-end, 11/16-inch
Wrench, open-end, -inch
Personnel Required
Wrench, open-end, 7/8-inch
(two required)
Two
Materials/Parts
Equipment Condition
Detergent, non-sudsing (item 12,
Console cover removed (page 2-1092).
appendix C)
Rags, wiping (item 24, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can
cause irritation.
2-1047
Previous Page
