TM 9-2320-269-20-2
POLE GUIDE ELEVATION HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
34.
Molded hose
Hose retainer (2)
Place in position.
assembly (1)
and locking
plate (3)
35.
Locking plate (3)
Two nuts (4)
Screw on, and tighten using 9/16-inch socket
and handle.
36.
Housing (5)
Molded hose
Slowly pull on hose assembly (1), and
assembly (1)
then slowly release it to check hose
payout and takeup.
37
Housing cover (6)
With help from assistant, put in
38.
Hosing cover (6)
Twelve washers (7),
Screw on, and tighten using 7/16-inch
new lockwashers (8),
socket and handle.
and nuts (9)
TA229260
2-1044
Previous Page
