TM 9-2320-269-20-2
OUTRIGGER LOCKOUT SWITCH
This task covers:
a. Removal (page 2-917)
c.
Installation (page 2-920)
b. Cleaning (page 2-920)
INITIAL SETUP
Tools
Materials/Parts
Brush, wire
Gasket, boot
Pliers, slip-joint
Packing, performed, boot
Screwdriver, flat-tip
Rags, wiping (item 24, appendix C)
Wrench, open-end, 5116-inch
Tags, marking (item 29, appendix C)
Personnel Required
One
Equipment Condition
Outrigger lowered (TM 9-2320-269-10)
for switch being serviced.
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
This procedure is for right rear outrigger switch.
Procedure for the other outrigger
switches is the same.
2-917
Previous Page
