TM 9-2320-269-20-2
OUTRIGGER LOCKOUT SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
17.
Wires (1) and (2)
Wipe clean with rags, and repair if
broken or corroded (page 2-433).
18.
Switch (3),
Wipe clean with rags, and replace
cover (4), and
gasket (5) if torn.
gasket (5)
19.
Grommet (6)
Wipe clean with rags, and replace if
torn or grooved.
20.
Arm (7)
Wine clean with rags. and lubricate
(LO 9-2320-269-12)
INSTALLATION
21.
Nut (8)
New packing (9)
Put in.
22.
Switch (3)
New gasket (10)
Put on.
23.
Nut (8), boot (11),
a. Put nut (8) in arm (7).
and arm (7)
b. Screw nut on, holding arm straight,
and tighten using pliers.
24.
Plunger (12)
Boot (11) and
Work boot (11) over plunger (12),
clip (13)
and put clip (13) on using flat-tip
screwdriver.
TA229170
2-920
Previous Page
