TM 9-2320-269-20-2
OUTRIGGER LOCKOUT SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
30.
Switch (1)
Cap (2)
Screw on, and tighten.
31.
Cover (3)
Gasket (4)
Put in.
32.
Switch (1)
Cover (3) and
a. Put cover (3) on.
two screws (5)
b. Screw in screws (5), and tighten
33.
Plate (6)
Two screws (7)
Put through.
34.
Switch (1)
Put on, and hold in place.
35.
Two screws (7)
Two nuts (8)
Screw on, and tighten using flat-tip
screwdriver and 5/16-inch wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1. Raise outrigger(TM 9-2320-269-10).
2. Check operation of switches (TM 9-2320-269-10).
TASK ENDS HERE
TA229172
2-922