TM 9-2320-269-20-2
POLE GUIDE ASSEMBLY - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Fill with hydraulic fluid (LO 9-2320-269-12).
2. Operate auxiliary equipment (TM 9-2320-269-10),
and check for proper operation and leaks.
TASK ENDS HERE
AUGER HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-927)
c. Inspection/Replacement (page 2-934)
b. Cleaning (page 2-934)
d. Installation (page 2-935)
INITIAL SETUP
Tools
Materials/Parts - Continued
Fish tape, 50-ft reel
Solvent, drycleaning (item 28, appendix C)
Pail, utility, 3-qt
Tape, teflon (item 32, appendix C)
Wrench, box-end, 9/16-inch
Tags, marking (item 29, appendix C)
Wrench, open-end, 11/4-inch
(two required)
Personnel Required
Wrench, open-end, 1 7/8-inch
Two
Materials/Parts
Equipment Condition
Detergent, non-sudsing (item 12,
appendix C)
Console cover removed (page 2-1092).
Rags, wiping (item 24, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can
cause irritation.
2-927
Previous Page
