TM 9-2320-269-20-2
OUTRIGGER WARNING SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT - CONTINUED
26.
Two screws (1)
Two nuts (2)
Loosen using flat-tip screwdriver
and 5116-inch wrench.
27.
Vehicle
Outrigger (3)
Raise (M 9-2320-269-10).
28.
Outrigger (3)
Using chalk, draw line on plate (4)
and plate (4)
along outrigger (3).
29.
Outrigger (3)
Lower (TM 9-2320-269-10).
30.
Plate (4)
Switch (5)
Move switch (5) until plunger (6) is
over line 1/4-inch (6.37 cm), and have
assistant hold in place.
31.
Two screws (1)
Two nuts (2)
Tighten using screwdriver and 5116-inch
wrench.
32.
Vehicle
Outrigger (3)
a. Raise (TM 9-2320-269-10).
b. Check warning light on dash panel.
c. If light is on, repeat adjustment
for all switches (5).
TASK ENDS HERE
TA229167
2-916
Previous Page
