TM 9-2320-269-20-2
OUTRIGGER WARNING SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
15.
Switch (1)
Wire (2)
a. Check tag for proper position, and
take off.
b. Put wire (2) through.
16.
Terminal (3) and
Washer (4) and
Screw in, and tighten using flat-tip
wire (2)
screw (5)
screwdriver.
17.
Switch (1)
Wire (6)
a. Check tag for proper position, and
take off.
b. Put wire (6) through.
18.
Terminal (7) and
Washer (8) and
Screw in, and tighten using flat-tip
wire (6)
screw (9)
screwdriver.
19.
Switch (1)
Cap (10)
Screw on, and tighten.
20.
Cover (11)
Gasket (12)
Put in.
21.
Switch (1)
Cover (11) and
a. Put cover (11) on.
two screws (13)
b. Screw in screws (13), and tighten
using flat-tip screwdriver.
TA229165
2-914
Previous Page
