INSTALLATION - CONTINUED
NOTE
If floodlight assembly is being installed, go to step 28.
25.
Retaining ring (1)
Lamp (2)
Put in.
26.
Four clips (3)
Put in, and press in place.
27.
Two screws (4)
Two terminals (5)
a. Put terminals (5) on.
b. Tighten screws (4) using flat-tip
screwdriver.
28.
Housing (6)
Retaining ring (1)
Hook on, and hold in place.
29.
Retaining ring (1)
Screw (7)
Screw in, and tighten using flat-tip
NOTE
FOLLOW-ON MAINTENANCE: Check operation of floodlight (TM 9-2320-269-10).
TASK ENDS HERE
TA229162
2-910
Previous Page
