TM 9-2320-269-20-2
FLOODLIGHT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
14.
Plate (1) and
Using wire brush, clean off dirt and
brackets (2) and (3)
corrosion and wipe clean with rags.
15.
Spacers (4) and (5)
Wipe clean with rags, and replace if
broken or grooved.
16.
Bushing (6)
Wipe clean with rags, and replace if
cracked, or grooved.
17.
Bracket (2)
Bushing (6) and two
a. Put bushing (6) in.
spacers (4)
b. Put in spacers (4), and hold in place.
18.
Plate (1)
Bracket (2) and
Put bracket (2) in, and put screw (7)
screw (7)
through.
19.
Screw (7)
New lockwasher (8)
a. Put lockwasher (8) on.
and nut (9)
b. Screw on nut (9), and tighten using
9/16-inch socket, handle, and 9/16-
inch wrench.
NOTE
If only lamp is being installed, go to step 25.
TA229160
2-908
Previous Page
