TM 9-2320-269-20-1
REAR AXLE COMPANION FLANGE - CONTIUNED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
Axle (1)
Flange (2)
Using scriber, matchmark to aid in
installation
2.
Shaft (3)
Locknut (4)
Using 1 13/16-inch socket and impact
wrench, unscrew, take off, and get rid of.
3.
Washer (5)
Take off.
4.
Flange (2)
Slide off.
INSTALLATION
5
Shaft (3)
Flange (2)
Aline scribe marks from removal,
and slide on.
6.
Washer (5)
Put on.
7.
New locknut (4)
Screw on, and tighten to 600 ft-lb
(816 N m) of torque using 1 13/16-inch
socket and torque wrench with 1/2-inch
AS7.A
NOTE
FOLLOW-ON MAINTENANCE: Install propeller shaft onto flange (page 2-457).
TASK ENDS HERE
TA228868
2-473
Previous Page
