TM 9-2320-269-20-1
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If the adapter is not being installed, go to step 11.
8.
Shaft (7)
Adapter (1)
Aline scribe marks from removal,
and slide on.
9.
Washer (9)
Put on.
10.
New locknut (8)
Screw on, and tighten to 600 ft-lb
(816 N m) of torque using 2 3/4-inch
socket and torque wrench with 3/4-inch
drive.
11.
Adapter (1)
Flange (2) and
a. Aline scribe marks from removal,
eight screws (3)
and hold flange (2) in place.
b. Put screws (3) in.
12.
Eight screws (3)
Eight new
a. Put lockwashers (5) on.
lockwashers (5)
b. Screw on, and tighten nuts (4) using
and nuts (4)
9/16-inch socket, handle, and
9/16-inch wrench.
TA228867
2-471
Previous Page
