TM 9-2320-269-20-1
AXLE SHAFTS - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Check axle for proper operation and leaks (TM 92320-269-10).
TASK ENDS HERE
BREATHER VALVE
This task covers:
a. Removal (page 2-476)
b. Installation (page 2-476)
INITIAL SETUP
Tools
Materials/Parts
Brush, wire
Rags, wiping (item 24, appendix C)
Pliers, slip-joint, angle-nose
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Axle housing (1)
Breather valve (2)
a. Using wire brush, clean debris from
housing around valve (2).
b. Using pliers, unscrew and take off.
c. Cover opening with rag.
INSTALLATION
2.
Axle housing (1)
Breather valve (2)
a. Take off rag.
b. Screw in, and tighten using pliers.
2-476
Previous Page
