TM 9-2320-269-20-1
TRANSMISSION SHAFT AND CENTER BEARING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
Adapter (1)
Flange (2)
Using scriber, matchmark to aid in
installation.
2.
Eight screws (3)
Eight nuts (4)
a. Using 9/16-inch socket, handle, and
and lockwashers (5)
9/16-inch wrench, unscrew and take off.
b. Get rid of lockwashers (5).
3.
Adapter (1)
Eight screws (3)
a. While holding flange (2), take
and flange (2)
out screws (3).
b. Take out flange (2).
NOTE
If the adapter is not being removed, go to INSTALLATION.
4.
Transmission (6)
Adapter (1)
Using scriber, matckmark to aid in
installation.
5.
Shaft (7)
Locknut (8)
Using 2 3/4-inch socket and impact
wrench, unscrew, take off and get rid of.
6.
Washer (9)
Take off.
7.
Adapter (1)
Slide off.
2-470
Previous Page
