TM 9-2320-269-20-1
AMPERE, WATER TEMPERATURE, AND OIL PRESSURE GAGES
This task covers:
a. Removal (page 2-316)
b. Installation (page 2-317)
INITIAL SETUP:
Tools
Personel Required
Handle, ratchet, 3/8-inch drive
One
Socket, 3/8-inch drive, 3/8-inch
Equipment Condition
Materials/Parts
Battery ground cable disconnected
Lockwashers, split (two required)
Tags, marking (item 29, appendix C)
Key switch removed (page 2-347).
Headlight switch removed (page 2-356).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
This task is for ampere gage. Water temperature and oil pressure gages are removed in the same way.
1.
Two gage studs (1)
Two lead wire
Using 3/8-inch socket and handle, unscrew
nuts (2)
and take off.
2.
Two lead wires (3)
a. Take off.
b. Tagwires(3).
3.
Two mounting
Using 3/8-inch socket and handle, unscrew
nuts (4)
and take off.
4.
Instrument panel (5)
Gage (6) and
Take out.
bracket (7)
2-316
Previous Page
