TM 9-2320-269-20-1
FUEL LEVEL GAGE
This task covers:
a. Removal (page 2-318)
b. Installation (page 2-318)
INITIAL SETUP:
Tools
Personnel Required
Handle, ratchet, 1/4-inch drive
One
Socket, 1/4-inch drive, 3/8-inch
Equipment Condition
Material/Parts
Battery ground cable disconnected
Tags, marking (item 29, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Two fuel level gage
Two nuts (2) Using 3/8-inch socket and handle, un-
mounting studs (1)
screw and take out.
2.
Gage lead wires (3)
a.
Take off.
b.
Tag wires (3).
3.
Two nuts (4)
Using 3/8-inch socket and handle, un-
screw and take out.
4.
Instrument panel (5)
Fuel level gage (6)
Take out.
and bracket (7)
INSTALLATION
5.
Instrument panel (5)
Fuel level gage (6)
Put in position.
and bracket (7)
6.
Two fuel level gage
Two nuts (4) Screw in, and tighten using 3/8-inch
mounting studs (1)
socket and handle.
2-318
Previous Page
