TM 9-2320-269-20-1
EMERGENCY STOP SOLENOID - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
7.
Solenoid mounting
Solenoid (2)
Take out, sliding along left side mount-
bracket (1)
ing screw (3) until clevis (5) clears
bracket (1).
8.
Left side solenoid
Take out.
mounting screw (3)
INSTALLATION
9.
Solenoid mounting
Left (3) and right
Slide on.
bracket (1)
(4) side solenoid
mounting screws
10.
Solenoid (2)
Place clevis (5) through bracket (1),
and slide solenoid (2) onto screws (3)
and (4) being careful not to let solenoid
(2) come apart.
11.
Engine
Support bracket (6)
a. Turn in against solenoid (2) pushing
left side screw (3) forward.
b. Push screw (3) through bracket (1).
12.
Support bracket (6)
Two screws (7)
a. Position front screw (7) through brac-
and (8)
ket (6) into engine.
b. Screw in, and tighten using 9/16-inch
wrench.
13.
Two screws
Two new lockwashers
Screw in, and tighten using 1/2-inch
(3) and (4)
(9) and nuts (10)
socket, handle, and 1/2-inch wrench.
2-312
Previous Page
