TM 9-2320-269-20-1
TRANSMISSION OIL PRESSURE SENDING UNIT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
4.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
INSTALLATION
5.
Transmission case
Oil pressure
a. Wrap threads (6) with two turns
fitting (4)
sending unit (5)
of teflon tape (page 2-142).
b. Screw in, and tighten using slip-
joint pliers and 7/16-inch wrench.
6.
Two sending unit
Two lead wires (3)
a. Take off tags.
terminals (1)
b. Put in position.
7.
Two screws (2)
Screw in, and tighten using flat-tip
screwdriver.
FOLLOW-ON MAINTENANCE
1.
Connect battery ground cable (page 2-414).
2.
Refill transmission fluid to recommended level if necessary (LO 9-2320-269-12).
3.
Start engine, and engage transmission for 30 seconds (TM 9-2320-269-10).
4.
Put transmission in neutral, stop engine, and check for leaks (TM 9-2320-269-10).
TA228773
TASK ENDS HERE
2-309
Previous Page
