TM 9-2320-269-20-1
EMERGENCY STOP SOLENOID
This task covers:
a. Removal (page 2-310)
b. Installation (page 2-312)
INITIAL SETUP:
Tools
Materials/Parts
Handle, ratchet, 3/8-inch drive
Lockwasher, stop, solenoid
Screwdriver, flat-tip, 1/4-inch
Lockwasher, solenoid, mounting screw
Socket, deep well, 3/8-inch drive,
(two required)
1/2-inch
Tags, marking (item 29, appendix C)
Wrench, open-end, 1/4-inch
Wrench, open-end, 11/32-inch
Personnel Required
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch
One
Equipment Condition
Engine cover removed (page 2-840).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Solenoid clevis (1)
Throttle chain (2),
a. Using 11/32-inch and 1/4-inch
screw (3), and
wrenches, unscrew and take out.
nut (4)
b. Let chain hang.
2.
Stop solenoid (5)
Lead wire (6),
a. Using flat-tip screwdriver, unscrew
screw (7), and
and take out.
lockwasher (8)
b. Get rid of lockwasher (8).
c. Tag wire (6).
3.
Left side solenoid
Nut (10) and lock-
a. Using 1/2-inch wrench, 1/2-inch
mounting screw (9)
washer (11)
socket and handle, unscrew and
take out.
b. Get rid of lockwasher (11).
4.
Solenoid support
Two screws (13)
a. Using 9/16-inch wrench, loosen rear
bracket (12)
and (14)
screw (14).
b. Using 9/16-inch wrench, take out front
screw (13).
2-310
Previous Page
