TM 9-2320-269-20-1
OIL PRESSURE LOCKOUT SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
1.
Oil pressure lockout
Two screws (2)
Using screwdriver and 5/16-inch wrench,
switch (1)
unscrew and take off.
2.
Two lead wires (3)
a. Take out.
b. Tag wires (3).
3.
Oil filter head
Oil pressure
Using 7/16-inch wrench, unscrew and
elbow (4)
lockout switch (1)
take off.
INSTALLATION
4.
Oil filter head
Oil pressure
a. Wrap clean threads with two turns of
elbow (4)
lockout switch (1)
teflon tape (page 2-142).
b. Screw in, and tighten using 7/16-inch
wrench.
5.
Oil pressure lockout
Two lead wires (3)
a. Check tags, and take off.
switch (1)
b. Put in position.
6.
Two screws (2)
Screw in, and tighten using screwdriver
and 5/16-inch wrench.
2-306
Previous Page
