TM 9-2320-269-20-1
HEADLIGHT SWITCH
This task covers:
a. Removal (page 2-356)
b. Installation (page 2-357)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 3/8-inch drive
One
Pliers, long round-nose
Socket, 3/8-inch drive, 1/2-inch
Equipment Condition
Wrench, open-end, 1/2-inch
Battery ground cable disconnected
Materials/Parts
Lockwasher, winch lever bracket
(two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Light switch
Locknut (3) Using 5/8-inch wrench, unscrew
REMOVAL
1.
Winch lever
Two nuts (2),
a.
Using 1/2-inch socket,
handle,
bracket (1)
lockwashers (3),
and 1/2-inch
wrench, unscrew
and screws (4)
and take out.
b.
Get rid of lockwashers (3).
2.
Dash panel (5)
Winch lever Take off.
bracket (1)
3.
Headlight
Knob (7)
Unscrew, and take off.
switch (6)
4.
Headlight
Retaining
Using long round-nose pliers, turn
switch (6) to
ring (8)
and take out.
dash panel (5)
5.
Dash panel (5)
Headlight
Push through.
switch (6)
2-356
Previous Page
