TM 9-2320-269-20-1
ROTATING LIGHT SWITCH
This task covers:
a. Removal (page 2-354)
b. Installation (page 2-354)
INITIAL SETUP
Tools
Equipment Condition
Screwdriver, flat-tip, 1/4-inch
Battery ground cable disconnected
Wrench, open-end, 5/8-inch
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Light switch
Locknut (3) Using 5/8-inch wrench, unscrew
(1) to dash
and take out.
panel (2)
2.
Dash panel (2)
Light switch (1)
Take out.
3.
Light switch (1)
Two screws (4) and
Using flat-tip screwdriver, unscrew
lead wires (5)
and take out.
INSTALLATION
4.
Light switch (1)
Two screws (4)
Screw in, and tighten using flat-tip
and lead wires (5)
screwdriver.
5.
Dash panel (2)
Light switch (1)
Put through.
6.
Light switch (1)
Locknut (3) Screw on, and tighten using 5/8-inch
wrench.
2-354
Previous Page
