TM 9-2320-269-20-1
MARKER LIGHT SWITCH
This task covers:
a. Removal (page 2-352)
b. Installation (page 2-352)
INITIAL SETUP
Tools
Equipment Condition
Screwdriver, flat-tip, 1/4-inch
Battery ground cable disconnected
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Switch
Harness
Turn counterclockwise, and take out.
housing (1)
connector (2)
Harness (3)
Take off.
2
3.
Mounting
Four screws (5)
Using flat-tip screwdriver,
unscrew and
plate (4)
take out.
4.
Switch housing (1)
Take out.
INSTALLATION
5.
Mounting
Switch housing (1)
Slide on mounting plate (4).
plate (4)
6.
Four screws (5)
Screw in, and tighten using flat-tip
screwdriver.
7
.
Switch
Harness (3) Position on housing (1).
housing (1)
8.
(1) Harness
Turning clockwise, tighten.
connector (2)
2-352
Previous Page
