TM 9-2320-269-20-2
SLIDE-IN DATA PLATES
This task covers:
Replacement (page 2-1336)
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, flat-tip, 1/16-inch
Data plate (as required)
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REPLACEMENT
NOTE
Except as noted, the steps in this task are the same for all slide-in data plates. The POLE GUIDE
ELEVATION data plate is used as the example.
1.
Data plate
Data plate (2)
a.
Slide up to screw (3).
slide rail (1)
b.
Using flat-tip screwdriver, pry up
and slide out.
2.
New data plate (2)
a.
Slide past screw (3) and into place.
b.
Push flat.
2-1336
Previous Page
