TM 9-2320-269-20-2
HEATER ASSEMBLY, HEAT CONTROL, AND VENT CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
48.
Backplate (1)
Core (2)
Take off.
49.
Hose (3)
Clamps (4)
Take off.
REPAIR
NOTE
To repair heater core, see FM 43-2.
ASSEMBLY
50.
Hose (3)
Two clamps (4)
Slide on.
51.
Backplate (1)
Hose (3)
Push on.
nipple (5)
52.
Hose (3)
Clamp (4)
a. Put in position.
to nipple (5)
b. Tighten using flat-tip screwdriver.
53.
Backplate (1)
Core (2) and
Put in position so upper nipple (6) of
backplate (1)
core (2) goes through hole in
backplate (1).
54.
Core (2)
Hose (3)
Push on.
55.
Hose (3) to
Clamp (4)
a. Put in position.
core (2)
b. Tighten using flat-tip screwdriver.
56.
Heater (7)
Core (2) and
Put in position so core (2) rests on
backplate (1)
core gasket (hidden).
57.
Backplate (1)
Eleven screws (8)
Screw in, and tighten using 4-inch
to heater (7)
cross-tip screwdriver.
2-1278
Previous Page
